资源描述
BRHNISIHI SIANDARD
BS EN
1370:1997
m
Founding
5 Surface roughness
g inspection by visual
? tactile comparators
QoEo
300-ooE-O
The European Standard EN 1370: 1996 has the status of a
British Standard
ICS17.040.20,77.140.80:77.150.01
NO COPYING WTHOUT BSI PERMISSON EXCEPT AS PERMITTED BY COPYRGHTLAW
BS EN1370:1997
m
Committees responsible for this
British Standard
oOoo5
The preparation of this British Standard was entrusted to Technica Committee
ISE/NFE/9, Foundry technology, upon which the following bodies were represented
Association of Bronze and Brass Founders (BCIRA)
British investment Casting Trade Association
Institute of British Foundrymen
Zinc Alloy Die Casters Association
No+ooNc22ooE
30
CU This British Standard, having
Go been prepared under the
k direction of the Engineering
S Sector Board, was published
o) under the authority of the
O Standards Board and comes into
uO1J只
15 June 1997
∠6 SI Isa
mendments issued since publication
Date
ext affected
る The following BSI references
O relate to the work on this
standard
O Committee reference ISE/NFE/9
a Draft for comment 94/300740 DC
0c
①ISBN0580274128
icensed Copy: Institute Of Technology Tallaght, Institute of Technology, Mon Apr 02 09: 53: 15 GMT+00: 00 2007, Uncontrolled Copy, (c)BS
2
9z
g<9
9巴
a=
历ze
BS EN1370:1997
m
National foreword
oOoo5
This British Standard has been prepared by Technical Committee ISE/NFEY9 and is the
English language version of EN 1370: 1996, published by the European Committee for
Standardization(CEN)
Compliance with a British Standard does not of itself confer immunity
from legal obligations
No+oooda<=ooE
300-ooE-O
Summary of pages
This document comprises a front cover, an inside front cover, pages i and ii, the
EN title page, pages 2 to 8, an inside back cover and a back cover
EUROPEAN SITANDARD
EN1370
m
NORMIE EUROPEENNE
EUIROPAISCIIE NORM
November 1996
oooot858N8+s
S17.040.20;25.120.30
escriptors: Foundry engineering, castings, steels, cast iron, copper, aluminium alloys, surface condition, roughness, inspection
dial gauges, viso-tactilc comparison specimens
English version
Founding -Surface roughness inspection by
visual tactile comparators
Fonderie- Controle de la rugosite de surface
Gierereiwesen- Pruifumg der Oberflachennrauheit
par comparateurs visotactiles
mit Hilfe von Vergleichsmust
This European Standard was approved by CEN on 1996-10-20. CEN members are
bound to comply with the EN/CENELEC Internal Regulations which stipulate the
conditions for giving this European Standard the status of a national standard
without any alteration
Up-to-date lists and bibliographical references concerning such national standards
may be obtained on application to the Central Secretariat or to any CEN member
QoEo
This European Standard exists in three official versions English, French, German)
A version in any other language made by translation under the responsibility of a
CEN member into its own language and notified to the Central Secretariat has the
samme status as the official versions
CEN
展开阅读全文
免费区 