DEUTSCHE NORM
February 1998
Ferritic-pearlitic steels for precipitation
hardening from hot-working temperatures
English version of DIN EN 10267
EN10267
CS77.140.10;77.140.20
Descriptors: Steel, ferritic steel, precipitation hardening
Von Warmformgebungstemperatur ausscheidungshartende ferritisch-perlitische Stahle
European Standard EN 10267: 1998 has the status of a DIN Standard
A comma is used as the decimal marker
National foreword
This standard has been prepared by ECISS/TC 23
The responsible German body involved in the preparation of this standard was the Normenausschub Eisen
und Stahl(Steel and Iron Standards Committee
EN comprises 18 pages
O No part of this standard may be reproduced without the prior permission of
Ref.No. DIN EN10267:1998-02
DIN Deutsches institut fur Normung e V, Berlin
Beuth Verlag Gmbh, D-10772 Berlin, has the exclusive right of sale for German Standards (/ -Noren
English price group 09 Sales No. 7109
05.98
三 JROPEAN STANDARD
EN10267
NORME EUROPEENNE
EUROPASCHE NORM
Januarv 1998
ICS77.140:77.140.10
Descriptors: Steel, ferritic steel, precipitation hardening
English version
Ferritic-pearlitic steels for precipitation hardening
from hot-working temperatures
Aciers de type ferrite-perlite aptes au Von Warmformgebungstemperatur
durcissement par precipitation a partir ausscheidungshartende ferritisch
des temperatures de formage a chaud perlitische Stahle
This European Standard was approved by CEN on 1997-12-11
CEN members are bound to comply with the CEN/CENELEC Internal Regulations
thich stipulate the conditions for giving this European Standard the status of a
national standard without any alteration
Up-to-date lists and bibliographical references concerning such national stand
ards may be obtained on application to the Central Secretariat or to any CEN
member
The European Standards exist in three official versions(English, French, German
A version in any other language made by translation under the responsibility of a
CEN member into its own language and notified to the Central Secretariat has the
same status as the official versions
CEN members are the national standards bodies of Austria, Belgium, the Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy
Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland
and the United Kingdom
CEN
European Committee for Standardization
Comite Europeen de Normalisation
Europaisches Komitee fur Normung
Central Secretariat: rue de Stassart 36, B-1050 Brussels
C 1998. CEN -All rights of exploitation in any form and by any means
Ref.No.EN10267:1998E
reserved worldwide for GEN national members
展开阅读全文