目 录
1 总则
2 术语
3 基本规定
4医用气体源与汇
4.1 医用空气供应源
Ⅰ 医疗空气
Ⅱ 器械空气
Ⅲ 牙科空气
4.2
医用氧气供应源
Ⅰ 一般规定
Ⅱ 医用液氧贮罐供应源
Ⅲ
医用氧焊接绝热气瓶汇流排供应源
Ⅳ
医用氧气钢瓶汇流排供应源
Ⅴ 医用分子筛(PSA)制氧机供应源
Ⅵ 对其它专业的要求
4.3 医用氮气、
医用二氧化碳、
医用氧化亚氮、医用混合气体供应源
4.4 医用真空汇
Ⅰ 医用真空汇
Ⅱ 牙科用真空汇
4.5 麻醉或呼吸废气排放系统
Ⅰ 一般规定
Ⅱ 独立真空机组
Ⅲ 共用医用真空机组
Ⅳ 粗真空风机排放机组
Ⅴ 射流式排放系统
4.6 医用气体储存库
5 医用气体管道与附件
5.1 管材与管件
5.2 管道设置
5.3 阀门与设置
5.4 其它管道附件
5.5 医用气体颜色和标识
6 医用气体供应末端设施
6.1 医用气体终端组件
Ⅰ 医用压缩气体和真空的终端组件
Ⅱ 麻醉废气排放终端组件
6.2
医用气体低压软管组件6.3 医用供应设备
6.4 设置规定
7 医用气体系统监测报警
7.1 医用气体系统报警
7.2 医用气体计量
7.3 医用气体系统集中监测与报警
Ⅰ 一般规定
Ⅱ 监测及数据采集
7.4 医用气体传感器
8
医用氧舱气体供应
8.1 一般规定
8.2 医用压缩空气供应
8.3
医用氧气供应
9 医用气体设计计算
9.1 一般规定
9.2 气体流量计算与规定
9.3 管路阻力损失
10 医用气体工程施工
10.1 一般规定
10.2 医用气体管道安装
10.3 医用气源站安装及调试
Ⅰ 医用压缩空气站安装及调试
Ⅱ 医用真空站安装及调试
Ⅲ 医用液氧贮罐站安装及调试
Ⅳ 医用分子筛(PSA)制氧站安装及调试
Ⅴ 医用气体汇流排间安装及调试
11 医用气体系统测试与验收
11.1 一般规定
11.2 施工中进行的检验测试
11.3 医用气体工程系统的验收
附录 A 医用气体终端组件的设置要求(资料性附录)
附录 B 医用气体的流量计算用表(资料性附录)
附录 C 医用气体终端组件测试方法
附录 D 医用气体低压软管组件测试方法
附录 E 医用供应设备机械强度测试方法
附录 F 医用气体工程施工主要记录
本规范用词说明
引用标准名录
附:条文说明
Contents
1 General Principles
2 Terms and definitions
3 General Requirements
4 Supply System for Medical Gases
4.1 Supply System for Air
Ⅰ Medical Air
Ⅱ Instrument Air
Ⅲ Dental Air
4.2 Supply System for Medical Oxygen
Ⅰ General
Ⅱ Bulk Cryogenic Liquid Source for Medical Oxygen
Ⅲ Manifolds for Medical Cryogenic Liquid Container
Ⅳ Manifolds for Medical Oxygen Cylinder
Ⅴ Medical Oxygen Concentrators (PSA)
Ⅵ Requirements for Other Specialty
4.3 Supply System for Medical N2/ CO2/ N2O/Mixed Gases
4.4 Supply System for Medical Vacuum
Ⅰ Medical Vacuum Plant
Ⅱ Dental Vacuum Plant
4.5AGSS or Waste Respiratory Gas Disposal System
Ⅰ General
Ⅱ Dedicated Vacuum Plant
Ⅲ Combined Plant with Medical Vacuum
Ⅳ Dedicated Blower
Ⅴ Venturi System
4.6 Storage for Medical Gases
5 Medical Gas Pipings and Accessories
5.1 Material and fittings
5.2 Piping Design Requirement
5.3 Valves and Design
5.4 Other Piping Accessories
5.5 Colour and Labeling for Medical Gases
6 Medical Gas Supply Units
6.1 Terminal Assemblies for Medical Gases
Ⅰ Terminal Unit for Compressed Medical Gases and Vacuum
Ⅱ Terminal Unit for AGSS Disposal System
6.2 Low-pressure Hose Assemblies for Use With Medical Gases
6.3 Medical Supply Units
6.4 Design Requirement
7 Montoring and Alarm for Medical Gas System
7.1 Alarm for Medical Gas System
7.2 Measurements for Medical Gases
7.3 Central Montoring and Alarm for Medical Gas System
Ⅰ General
Ⅱ Montorning and Data Collection
7.4 Sensors for Medical Gases
8 Supply for Oxygen Hyperbaric Chamber
8.1 General
8.2 Supply for Medical Compressed Air
8.3 Supply for Medical Oxygen
9 Design and Calculation for Medical Gases
9.1 General
9.2 Flow Calculation and Requirements
9.3 Pressure Loss for Pipings
10 Engineering Construction for Medic
免费区 