GOST R IEC 61851-1-2013.pdf

61851-1 2013 1 IE 61851-1:2010 Electric vehicle conductive charging system Part 1:General requirements(IDT)2014 61851-12013 II 1 -(),4 2 056 3 -22 2013.2149-4 61851-1:2010 -.1.(IE 61851-1:2010 Electric ve-hicle conductive charging system Part 1:General requirements).-,.5 1.02012(8).(1 ),-.()-.,-(gost.ru),2014 ,61851-12013 III 1 .12 .13 .34 .65 .66 .66.1 .66.2 .76.3 (,).76.4,2,3 4.116.5 .127 .127.1 .127.3 .137.4 .137.5 4.147.6 .148 .148.1 .149 ,.169.1 .169.2 .169.3 /.179.4 .179.5 IP.179.6 .179.7 .1710 .1710.1 .1710.2 .1710.3 .1810.4 .1811 .1811.1 .1811.2 .1811.3 IP .1811.4 .1911.5 .2011.6 .2011.7 .2011.8 .2111.9 .2211.10 .2211.11 .2211.12 .2211.13 .2211.14 .2211.15 .2311.16 .23 ()-().24 61851-12013 IV ().32 (),.41 ()().43.46 61851-12013 1 1 Electric vehicle conductive charging system Part 1:General requirements 20140901 1 -60038 1000 1500 -,.,(),-.,-;-()/.1 II,-.2 ,-.,62196-1.62196-2 1.,-.,-.2 .,-(-).60038:2009 IEC 60038:2009 IEC standard volteges 61851-12013 2 60068-2-30:2005 .2.-Db :,(12+12 )IEC 60068-2-30(2005)Environmental testing Part 2-30:Tests Test Db:Damp heat,cyclic(12 h+12 h cycle)60068-2-75:1997 .2.-Eh:IEC 60068-2-75(1997)Environmental testing Part 2:Tests Test Eh:Hammer tests 60068-2-78:2001 .2-78.-Cab:,IEC 60068-2-78(2001)Environmental testing.Part 2-78.Tests.Test Cab:Damp heat,steady state 60276 ,.-,IEC 60276 Definitions and nomenclature for carbon brushes,brush-holders,commutators and slip-rings 60309-1:1999,-.1.IEC 60309-1(1999)Plugs,socket-outlets and couplers for industrial purposes Part 1:General re-quirements 60309-2:1999,.2.-IEC 60309-2(1999)Plugs,socket-outlets and couplers for industrial purposes Part 2:Dimensional interchangeability requirements for pin and contact-tube accessories 60364-4-41:2005 .4-41.IEC 60364-4-41(2005)Low-voltage electrical installations Part 4-41:Protection for safety Protec-tion against electric shock 60529:1989 ,(IP)IEC 60529(1989)Degrees of protection provided by enclosures(IP code)60664-1:2007 .1.,IEC 60664-1(2007)Insulation coordination for equipment within low-voltage systems Part 1:Princi-ples,requirements and tests/60755:2008 ,-60884-1:2002 .1.IEC 60884-1:2002 Plugs and socket-outlets for household and similar purposes Part 1:General re-quirements 60884-2-5:1995 .2:IEC 60884-2-5(1995)Plugs and socket-outlets for household and similar purposes Part 2:Particular requirements for adaptors 60947-3:2008 -.3.,-IEC 60947-3(2008)Low-voltage switchgear and controlgear Part 3:Switches,disconnectors,switch-disconnectors and fuse-combination units 60950-1:2005 .1.IEC 60950-1(2005)Information technology equipment Safety Part 1:General requirements 60990:1999 IEC 60990(1999)Methods of measurement of touch current and protective conductor current 61000-6-1:2005 .6.1.,-61851-12013 3 IEC 61000-6-1(2005)Electromagnetic compatibility(EMC)Part 6-1:Generic standards Immunity for residential,commercial and light-industrial environments 61000-6-3:2006 .6-3.,-IEC 61000-6-3(2006)Electromagnetic compatibility(EMC)Part 6-3:Generic standards Emission standard for residential,commercial and light-industrial environments 61008-1:2010 ,-.1.IEC 61008-1(2010)Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses(RCCBs)Part 1:General rules 61009-1:2010 ,().1.-IEC 61009-1(2010)Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses(RCBOs)Part 1:General rules 61180-1:1992 .1.,IEC 61180-1(1992)High-voltage test techniques for low-voltage equipment;part 1:definitions,test and procedure requirements 62196-1:2003,.1.-250 400 IEC 62196-1:2003 Plugs,socket-outlets,vehicle couplers and vehicle inlets Conductive charging of electric vehicles Part 1:Charging of electric vehicles up to 250 A a.c.and 400 A d.c.6469-2:2009 .2.ISO 6469-2:2009 Electrically propelled road vehicles Safety specifications Part 2:Vehicle opera-tional safety means and protection against failures 6469-3:2001 .3.-ISO 6469-3:2001 Electric road vehicles.Safety specifications.Part 3.Protection of persons against electric hazards 50065-1:2001 -3 148,5.1.,3 3.1 (basic insulation):,-.3.2 (cable assembly):,()-().1 ,.2 ,/,.3 .1 3 ,.4 .3.3 (charger):,.3.3.1 I(class I charger):,.61851-12013 4 .3.3.2 II(class II charger):,:-,-;-,.3.3.3 (off-board charger):,-.-.3.3.3.1 (dedicated off-board charger):,-/.3.3.4 (on-board charger):,-.3.4 (charging):,/.3.5 (connection):.3.6 (control pilot):,-.3.7 (earth terminal):-,earth()ground(-).3.8 ()(),-(electric vehicle,EV,electric road vehicle):,-(,-,),.3.8.1 I(class I EV):,-.-.3.8.2 II(class II EV):,-,.3.9 ()(EV supply equipment(EVSE):,-.3.9.1 (a.c.EV charging station):,()-.61851-12013 5 3.9.2 (d.c.EV charging station):,(),-.3.9.3 (exposed conductive part):-,.3.9.4 (direct contact):.3.9.5 (indirect contact):-,.3.10 (live part):,-.3.10.1 (hazardous live part):,-.3.11 (in-cable control box):,.3.12 (plug and socket-outlet):,:.3.12.1 (plug):,.3.12.2 (socket-outlet):,.3.13 (power indicator):,-,.